Best Power Rack Reviews

Looking for the best power rack for home gym enthusiasts can be a big investment for some. Even the most positive power rack reviews and advocates can’t deny that they cost a lot of money and take up a huge amount of space.

However, for a serious bodybuilder, the power rack benefits are enough to make it one of the most important equipment for your home gym. You can’t compromise on the quality if you want to perform your power rack exercises, and why it’s crucial that you get the best power rack for home gym you can get.

Top 7 Best Power Rack Comparison List

To help you on your search, we’ve taken some time and effort into putting some of the most recommended power racks in one nifty list. Here’s a quick peek:

Titan really beefed up the Titan T-3 Series HD Power Rack and when you bolt this down you won’t have any worries at all. The 1-inch spacing between the 28 holes is excellent too.

The Atlas Power Rack Squat Deadlift Cage with Bench Racks is tough, steady, and easy to assemble.

The Titan T2 Power Rack Squat Deadlift HD Lift Cage is for Titan fans who find the T3 too expensive and too strong for their needs.

The PowerLine PPR200X Power Rack is also very tough, as attested by the 10-year warranty.

The TDS Squat Cage Short Power Rack is a great alternative if you have a low ceiling.

Reviews of the Best Power Racks

Now if you feel that for safety reasons you need a power rack that holds at least 1,000 pounds, then the T3 may be your best bet.

It uses 2 inch x 3 inch heavy 11ga (3.25mm) steel tubes with high density steel J-hooks and other ⅝ inch hardware.

This thing weighs a substantial 230 pounds, and it measures 92 inches in height, 46 inches in width, and 36 inches in depth. So you’re going to need a large room for this, along with a high ceiling.

The spacing for the holes is also just an inch apart. This means you get the full range of motion you don’t get with wide spacing, and you also get the holes you need for your spotting safety.

Assembling this power rack is not really a challenge, as the holes all line up. Also, all the bolts have the washers, lock washer and nut on it. Even when you’re working to assemble this on your own, you’re going to need just an hour.

So here are some reasons why this T3 is impressive:

Pro's

  • Its load capacity is terrific, so it won’t matter how much you progress on your weight lifting.
  • It’s extremely sturdy, although it’s still a good idea to bolt it down.
  • It comes with 2 pull-up bars that you can set at different heights.
  • Despite its strength, its price is still well below the $500 threshold.

Con's

  • You’ll need a lot of space, and to fit the plates on the rack you have to place this with some space away from your wall.
  • The plate holder at the back doesn’t really allow for very quick transitions between loading and unloading your bar. That can eat a lot of your timed rests.
  • Atlas offers a lot of attachments for this power rack, but you have to buy them separately.

Need more details?

Let’s start with a power rack that many consider as one of the best in the sub-$500 price range. This Atlas is quite affordable, as its price is actually in the $300 to $400 range.

Assembling this is not all that hard, even though there aren’t any explicit directions. You just need a combination wrench and a socket, and the exploded diagram should be enough to get this done in an hour.

It’s a full-size unit that’s 80 inches tall, and you’ll need a floor space of at least 56 inches for the width and 48 inches for the depth. Of course, that still doesn’t count the space you need to load the and for the space behind the rack if you’re going to store 45-pound plates at the back.

This is one sturdy power rack made of 1-inch round 12-gauge solid steel with short pins and a lock on design. It weighs 137 pounds, and it can carry up to 800 pounds of weight.

The holes for assembly line up perfectly, and all the welds are good. The hooks and safety bars seem solid, and it comes with a pull-up bar with knurling at both ends for a proper grip.

For adjustment, you have 28 holes that are 2 inches apart. That’s 28 positions you can use for different heights and exercises.

So why does this Atlas power rack have so many fans?

Pro's

  • It’s affordable and it offers a lot of value for the money.
  • It’s very sturdy and that weight capacity is reassuring.
  • It comes with built-in plate storage at the back, which adds to the stability of the power rack.
  • It’s very easy to assemble, which is a relief for many non-DIY fans.

Con's

  • You’ll need a lot of space, and to fit the plates on the rack you have to place this with some space away from your wall.
  • The plate holder at the back doesn’t really allow for very quick transitions between loading and unloading your bar. That can eat a lot of your timed rests.
  • Atlas offers a lot of attachments for this power rack, but you have to buy them separately.

Need more details?

Now let’s say your budget is a wee bit short for the T3 and you figure that a load capacity of 1,000 pounds is overkill.

If that’s the case, you can get the T2 and still enjoy the renowned Titan quality.

This weighs a still-substantial 107 pounds, and its load capacity is still notable at 700 pounds. It’s called the T2 because it uses 2 inch x 2 inch steel tubes. It’s very steady with great welds.

It is 83 inches high with the pull-up bar at 80 inches. The opening is 44 inches while the depth is 48 inches. So to be safe, you’re going to need a lot more room around the 4 by 4 feet floor space the T2 power rack requires.

Assembling the rack may require 2 people if you want things to go smoothly. However, some folks can do it solo and they only need 30 minutes or so.

Pro's

  • At this price range, it’s terrific.
  • Most people won’t really need more thn the 700 pounds this power rack can support.
  • You get the 28 different positions for various heights and exercises.
  • You also get pull-up and dip bars with this power rack.
  •  

Con's

  • The assembly instructions can be improved.
  • It may be a little shaky when you do pull-ups so you need to out some weights in the back.
  • It may slide if you put it on a tile or wood floor.

Need more details?

This power rack comes in at the under $400 price range and it has amassed quite a number of rave reviews. This is one tough power rack, even though it’s only rated for 600 pounds.

You’ll get 18 positions with the PPR200X. Also, together with an add-on lat attachment (sold separately with lifetime warranty), you can turn this power rack into a multi workout machine.

This weighs 136 pounds, and measures 44 inches in width, 82 inches by height and 46 inches in depth. The frame comes with a 10-year warranty while the other parts are covered for a year.

The PowerLine PPR200X does have a lot of good features:

Pro's

  • It’s easy to assemble.
  • It’s very tough.
  • It comes with a chin-up bar.
  • It allows you to add on a lat attachment that comes with a lat bar and low row bar.

Con's

  • It has 3-inch hole spacing so you will need a bench with the right height.
  • If you add the lat pulldown attachment, it will stick out by 2 feet at the back.
  • The paint from the 2 lift-offs and 2 safety rods peel off every time you slide them through the cage holes. The paint also comes off from the hooks. That’s why you also get a small bottle of paint as part of the purchase. But our recommendation is not to even bother reapplying the paint

Need more details?

Not every room has a high ceiling. If that’s your concern, then this TDS squat cage is a handy alternative.

This power rack is short, at just 72.5 inches tall (57 inches in width, 72.5 inches in height and 49 inches in depth) so it’s perfect for low 7-foot ceilings.

At the same time, it’s rated for 1,000 pounds weight capacity, with its ½-inch hardware.

It’s not much of a problem to assemble, as long as you follow the directions. Once you’re done assembling, it won’t wobble or shake even when you do pull-ups.

You also get 25 holes that are 2 inches apart. For your convenience, all the holes are numbered.

Pro's

  • It’s great for low ceilings.
  • It’s very tough and steady.
  • The numbers on the holes are very convenient.
  • It’s very affordable.

Con's

  • Since it’s not a regular size power rack, you’re limited in the exercises you can do. It’s not exactly ideal for pull-ups.
  • While it depends on your seller, some have noted that it takes a while to deliver. Some people had to wait for almost 2 weeks before it arrived.

Need more details?

Factors to Consider when Buying a Power Rack

You don’t have to limit your choices to the power racks on this list, of course. You can always do your own research, as long as you make sure that you read a lot of reviews so that you can anticipate any potential problems.

Here are some crucial factors you have to prioritize:

How Big Is It?

The first thing you need to do is to make sure that the power rack can actually fit in the spot you want to put it. So exact measurements for the dimensions are crucial, and you have to figure for additional space at the top so you can do your pull-ups properly.

Some versions of the power rack are shorter in height, so that you can get it to fit rooms with low ceilings. But this type of equipment requires a considerable width, which can provide greater stability and comfort.

How Much Weight Can It Carry?

The bare minimum should be at least 500 pounds. While you may not be lifting that much weight at first, you still need this weight capacity for safety reasons.

What’s the Quality of the Build?

You’ll be using this to carry your barbells and to support your weight when you do pull-ups, so the power rack must be very strong. The steel used must be thick, the use of plastic parts must be minimal, the bolts should be large, and the design should be rugged.

How Stable Is It?

It can’t be too light or too narrow, or it will just wobble every time you use it. That’s not good when you’re dealing with heavy weights, or when you pull yourself up.

So it should be designed for stability by being heavy and wide. If possible, there should be an option for you to bolt it down.

How Many Adjustments Can You Make?

What’s crucial here is that you don’t have a lot of space between the holes. Anything over 2.5 inches of space between the holes can be a problem, as you either don’t get full range of motion or you don’t get proper spotter safety.

Are There Any Accessories?

A basic rack doesn’t really do anything except support your bar lifting. So at the very least, you should have a pull-up bar.

It’s better if you have lots of accessories with your power rack, because as a serious lifter you’re probably going to use them all anyway. By getting them with the power rack, you can get a discount on the accessories and you know that they’re designed to work together properly.

Our Best Power Rack Recommendations

If you have a low ceiling, then just go for the TDS short power rack. Its smaller size can still handle a 1000 pounds of weight. If you want a full size power rack, then any of the others will serve you well.

However, the Titan T3 Power Rack  is our fave of the bunch. Its load capacity and 1-inch spacing all offer excellent workout benefits, which makes it the best power rack for us.

Share this guide - and help somebody today!

Facebook
Twitter
LinkedIn
Pinterest

Fresh Marketplace Updates in your Inbox.

We don’t spam. This is 100% Goodies!
Best Power Rack Reviews

Looking for the best power rack for home gym enthusiasts can be a big investment for some. Even the most positive power rack reviews and advocates can’t deny that they cost a lot of money and take up a huge amount of space.

However, for a serious bodybuilder, the power rack benefits are enough to make it one of the most important equipment for your home gym. You can’t compromise on the quality if you want to perform your power rack exercises, and why it’s crucial that you get the best power rack for home gym you can get.

Best Power Racks – The 2017 Buying GuideProduct SummaryTop 7 Best Power Rack Comparison TableReviews of the Best Power RacksTitan T-3 Series HD Power Rack – Best Power Rack for Home GymFitness Reality 810XLT Super Max Power Cage – Best Power Rack for the MoneyTitan T2 Power Rack Squat Deadlift HD Lift Cage – Top Power Rack for Serious BeginnersPowerLine PPR200X Power RackTDS Squat Cage Short Power Rack – Best Low Ceiling Short Power RackFactors to Consider when Buying a Power RackOur Best Power Rack Recommendations

Product Summary

To help you on your search, we’ve taken some time and effort into putting some of the most recommended power racks in one nifty list. Here’s a quick peek:

Titan really beefed up the Titan T-3 Series HD Power Rack and when you bolt this down you won’t have any worries at all. The 1-inch spacing between the 28 holes is excellent too.

The Atlas Power Rack Squat Deadlift Cage with Bench Racks is tough, steady, and easy to assemble.

The Titan T2 Power Rack Squat Deadlift HD Lift Cage is for Titan fans who find the T3 too expensive and too strong for their needs.

The PowerLine PPR200X Power Rack is also very tough, as attested by the 10-year warranty.

The TDS Squat Cage Short Power Rack is a great alternative if you have a low ceiling.

Top 7 Best Power Rack Comparison Table

Picture

Name

Weight Capacity

Dimensions

(L x W x H)​

Titan T3 HD Best Power Rack

Titan T-3 Series HD Power Rack

(Editor’s Choice)​

Over 1,000 lbs

36 x 46 x 92 inches

Check Price
Fitness Reality 810XLT Super Max Power Cage

Fitness Reality 810XLT Super Max Power Cage

 800 lbs

50.5 x 46.5x 83.5 inches

Check Price
Titan T2 Power Rack

Titan T2 Power Rack Squat Deadlift HD Lift Cage

700 lbs

48 x 58 x 71.5 inches

Check Price
PowerLine PPR200X Power Rack

PowerLine PPR200X Power Rack

700 lbs

44 x 46 x 82 inches

Check Price
TDS Best Short Power Rack

TDS Squat Cage Short Power Rack

1,000 lbs

49 x 57 x 72 inches

Check Price

Body Solid GPR378 Power Rack

Body Solid GPR378 Pro Power Rack

800 lbs

53 x 50 x 84 inches

Check Price
Valor Fitness BD7 Power Rack

Valor Fitness BD-7 Power Rack with Lat Pull Attachment

Up to 800 lbs

47 x 63.5 x 82 inches

Check Price

Reviews of the Best Power Racks

Titan T-3 Series HD Power Rack – Best Power Rack for Home Gym

Now if you feel that for safety reasons you need a power rack that holds at least 1,000 pounds, then the T3 may be your best bet. It uses 2 inch x 3 inch heavy 11ga (3.25mm) steel tubes with high density steel J-hooks and other ⅝ inch hardware.

Titan T3 HD Best Power Rack

This thing weighs a substantial 230 pounds, and it measures 92 inches in height, 46 inches in width, and 36 inches in depth. So you’re going to need a large room for this, along with a high ceiling.

The spacing for the holes is also just an inch apart. This means you get the full range of motion you don’t get with wide spacing, and you also get the holes you need for your spotting safety.

Assembling this power rack is not really a challenge, as the holes all line up. Also, all the bolts have the washers, lock washer and nut on it. Even when you’re working to assemble this on your own, you’re going to need just an hour.

So here are some reasons why this T3 is impressive:

  • Its load capacity is terrific, so it won’t matter how much you progress on your weight lifting.
  • It’s extremely sturdy, although it’s still a good idea to bolt it down.
  • It comes with 2 pull-up bars that you can set at different heights.
  • Despite its strength, its price is still well below the $500 threshold.

There are some issues, but they’re not all that serious:

  • You’ll need a lot of space, and to fit the plates on the rack you have to place this with some space away from your wall.
  • The plate holder at the back doesn’t really allow for very quick transitions between loading and unloading your bar. That can eat a lot of your timed rests.
  • Atlas offers a lot of attachments for this power rack, but you have to buy them separately.
View It Now!

Fitness Reality 810XLT Super Max Power Cage – Best Power Rack for the Money

Let’s start with a power rack that many consider as one of the best in the sub-$500 price range. This Atlas is quite affordable, as its price is actually in the $300 to $400 range.

Fitness Reality 810XLT Super Max Power Cage

Assembling this is not all that hard, even though there aren’t any explicit directions. You just need a combination wrench and a socket, and the exploded diagram should be enough to get this done in an hour.

It’s a full-size unit that’s 80 inches tall, and you’ll need a floor space of at least 56 inches for the width and 48 inches for the depth. Of course, that still doesn’t count the space you need to load the and for the space behind the rack if you’re going to store 45-pound plates at the back.

This is one sturdy power rack made of 1-inch round 12-gauge solid steel with short pins and a lock on design. It weighs 137 pounds, and it can carry up to 800 pounds of weight.

The holes for assembly line up perfectly, and all the welds are good. The hooks and safety bars seem solid, and it comes with a pull-up bar with knurling at both ends for a proper grip.

For adjustment, you have 28 holes that are 2 inches apart. That’s 28 positions you can use for different heights and exercises.

So why does this Atlas power rack have so many fans?

  • It’s affordable and it offers a lot of value for the money.
  • It’s very sturdy and that weight capacity is reassuring.
  • It comes with built-in plate storage at the back, which adds to the stability of the power rack.
  • It’s very easy to assemble, which is a relief for many non-DIY fans.

There are some issues, but they’re not all that serious:

  • You’ll need a lot of space, and to fit the plates on the rack you have to place this with some space away from your wall.
  • The plate holder at the back doesn’t really allow for very quick transitions between loading and unloading your bar. That can eat a lot of your timed rests.
  • Atlas offers a lot of attachments for this power rack, but you have to buy them separately.
View It Now!

Titan T2 Power Rack Squat Deadlift HD Lift Cage – Top Power Rack for Serious Beginners

Now let’s say your budget is a wee bit short for the T3 and you figure that a load capacity of 1,000 pounds is overkill. If that’s the case, you can get the T2 and still enjoy the renowned Titan quality.

Titan T2 Power Rack

This weighs a still-substantial 107 pounds, and its load capacity is still notable at 700 pounds. It’s called the T2 because it uses 2 inch x 2 inch steel tubes. It’s very steady with great welds.

It is 83 inches high with the pull-up bar at 80 inches. The opening is 44 inches while the depth is 48 inches. So to be safe, you’re going to need a lot more room around the 4 by 4 feet floor space the T2 power rack requires.

Assembling the rack may require 2 people if you want things to go smoothly. However, some folks can do it solo and they only need 30 minutes or so.

  • At this price range, it’s terrific.
  • Most people won’t really need more than the 700 pounds this power rack can support.
  • You get the 28 different positions for various heights and exercises.
  • You also get pull-up and dip bars with this power rack.

Of course, since it’s cheaper than the T3 it does have its downsides aside from the lower load capacity.

  • The assembly instructions can be improved.
  • It may be a little shaky when you do pull-ups so you need to out some weights in the back.
  • It may slide if you put it on a tile or wood floor.
View It Now!

PowerLine PPR200X Power Rack

This power rack comes in at the under $400 price range and it has amassed quite a number of rave reviews. This is one tough power rack, even though it’s only rated for 600 pounds.

PowerLine PPR200X Power Rack

You’ll get 18 positions with the PPR200X. Also, together with an add-on lat attachment (sold separately with lifetime warranty), you can turn this power rack into a multi workout machine.

This weighs 136 pounds, and measures 44 inches in width, 82 inches by height and 46 inches in depth. The frame comes with a 10-year warranty while the other parts are covered for a year.

The PowerLine PPR200X does have a lot of good features:

  • It’s easy to assemble.
  • It’s very tough.
  • It comes with a chin-up bar.
  • It allows you to add on a lat attachment that comes with a lat bar and low row bar.

There are some complaints, though:

  • It has 3-inch hole spacing so you will need a bench with the right height.
  • If you add the lat pulldown attachment, it will stick out by 2 feet at the back.
  • The paint from the 2 lift-offs and 2 safety rods peel off every time you slide them through the cage holes. The paint also comes off from the hooks. That’s why you also get a small bottle of paint as part of the purchase. But our recommendation is not to even bother reapplying the paint.
View It Now!

TDS Squat Cage Short Power Rack – Best Low Ceiling Short Power Rack

Not every room has a high ceiling. If that’s your concern, then this TDS squat cage is a handy alternative.

TDS Best Short Power Rack

This power rack is short, at just 72.5 inches tall (57 inches in width, 72.5 inches in height and 49 inches in depth) so it’s perfect for low 7-foot ceilings. At the same time, it’s rated for 1,000 pounds weight capacity, with its ½-inch hardware.

It’s not much of a problem to assemble, as long as you follow the directions. Once you’re done assembling, it won’t wobble or shake even when you do pull-ups.

You also get 25 holes that are 2 inches apart. For your convenience, all the holes are numbered.

  • It’s great for low ceilings.
  • It’s very tough and steady.
  • The numbers on the holes are very convenient.
  • It’s very affordable.

So what’s the catch?

  • Since it’s not a regular size power rack, you’re limited in the exercises you can do. It’s not exactly ideal for pull-ups.
  • While it depends on your seller, some have noted that it takes a while to deliver. Some people had to wait for almost 2 weeks before it arrived.
View It Now!

Factors to Consider when Buying a Power Rack

You don’t have to limit your choices to the power racks on this list, of course. You can always do your own research, as long as you make sure that you read a lot of reviews so that you can anticipate any potential problems.

Here are some crucial factors you have to prioritize:

How Big Is It?

The first thing you need to do is to make sure that the power rack can actually fit in the spot you want to put it. So exact measurements for the dimensions are crucial, and you have to figure for additional space at the top so you can do your pull-ups properly.

Some versions of the power rack are shorter in height, so that you can get it to fit rooms with low ceilings. But this type of equipment requires a considerable width, which can provide greater stability and comfort.

How Much Weight Can It Carry?

The bare minimum should be at least 500 pounds. While you may not be lifting that much weight at first, you still need this weight capacity for safety reasons.

What’s the Quality of the Build?

You’ll be using this to carry your barbells and to support your weight when you do pull-ups, so the power rack must be very strong. The steel used must be thick, the use of plastic parts must be minimal, the bolts should be large, and the design should be rugged.

How Stable Is It?

It can’t be too light or too narrow, or it will just wobble every time you use it. That’s not good when you’re dealing with heavy weights, or when you pull yourself up.

So it should be designed for stability by being heavy and wide. If possible, there should be an option for you to bolt it down.

How Many Adjustments Can You Make?

What’s crucial here is that you don’t have a lot of space between the holes. Anything over 2.5 inches of space between the holes can be a problem, as you either don’t get full range of motion or you don’t get proper spotter safety.

Are There Any Accessories?

A basic rack doesn’t really do anything except support your bar lifting. So at the very least, you should have a pull-up bar.

It’s better if you have lots of accessories with your power rack, because as a serious lifter you’re probably going to use them all anyway. By getting them with the power rack, you can get a discount on the accessories and you know that they’re designed to work together properly.

Our Best Power Rack Recommendations

If you have a low ceiling, then just go for the TDS short power rack. Its smaller size can still handle a 1000 pounds of weight. If you want a full size power rack, then any of the others will serve you well.

However, the Titan T3 Power Rack  is our fave of the bunch. Its load capacity and 1-inch spacing all offer excellent workout benefits, which makes it the best power rack for us.